Marine Electrical Products & Supplies

Neglecting your boat’s electrical system more often than not will result in hiring a tow service to bring you back to shore. If you are avoiding it, know that working with 12 Volt and even 24-volt batteries are pretty safe. Nevertheless, when working, fixing, or upgrading your boat’s electrical system, you must use certified marine electrical products and supplies. Nothing will else will work or last the test of time when exposed to the salt or even freshwater regularly. If you thin you can buy yourself six months by using 12-volt car electrical accessories from your local auto parts, know that you are not only running the risk of getting stranded but also inviting a fire hazard. US Coast Guard certified marine electrical products and supplies are not more costly because manufacturers want to charge you more. They are made to last in the harsh marine environment.

  • 10 AWG Marine Primary Wire

    $20.33 ( as on 2024-11-20 22:39:28 - Details )
    Common Sense Marine 10 AWG Marine Wire - Tinned Copper Primary Boat Cable - Available in Black, Red, Yellow, Green, and White and MADE IN THE USA! This certified marine wire is BC-5W2 compliant and UL 1426 listed and meets ABYC and USCG specifications, which allows it to survive harsh marine environments.
  • 12 AWG Marine Primary Wire

    $13.52 ( as on 2024-11-19 19:10:10 - Details )
    Here is the right wire for the right job. Here is a 12 AWG Marine Primary Wire Available in Black, Red, Yellow, Green, and White - Made in The USA. High strand counts tinned copper conductor (Type III) for low resistance, high conductivity, and protection from corrosion. Meets SAE, ABYC, UL and Coast Guard requirements, 600 volts, 105°C dry, 75°C wet
  • 14 AWG Marine Primary Wire

    $11.02 ( as on 2024-11-19 20:58:29 - Details )
    This 14 AWG Marine Wire -Tinned Copper Primary Boat Cable - Available in Black, Red, Yellow, Green, and White. Common Sense Marine boat wire is BC-5W2 compliant and UL 1426 listed and meets ABYC and USCG specifications, which allows it to survive harsh marine environments. This single-conductor insulated boat wire uses Type III fine stranded copper wire and features a durable PVC jacket. All of our boat wire is pre-tinned, which helps resist corrosion and lengthens the life of the wire.
  • 16 AWG Marine Primary Wire

    $11.02 ( as on 2024-11-19 21:21:09 - Details )
    All of our boat wire is pre-tinned, which helps resist corrosion and lengthens the life of the wire. This 16 AWG Marine Primary Wire single-conductor insulated boat wire uses Type III fine stranded copper wire and features a durable PVC jacket
  • 4 AWG Marine Primary Wire

    $35.91 ( as on 2024-11-19 04:05:26 - Details )
    Here is the best wire for your high current job a 4 AWG Marine Primary Wire Available in Black, Red, Yellow, Green, and White - Made in The USA. You get a high strand count tinned copper conductor (Type III) for low resistance, high conductivity, and protection from corrosion with PVC insulation resists moisture, flame, acid, alkali, oil and gasoline
  • 8 AWG Marine Primary Wire

    $61.49 ( as on 2024-11-20 22:39:28 - Details )
    Top rated 8 AWG Marine Primary Wire with high-grade PVC insulation resists moisture, flame, acid, alkali, oil, and gasoline. UL standard 1426 listed, the recognized safety standard for boat wire. Meets SAE, ABYC, UL and Coast Guard requirements, 600 volts, 105°C dry, 75°C wet
  • Ancor Marine Grade Duplex and Triplex Wire

    $25.67 ( as on 2024-11-19 21:21:09 - Details )
    When it comes to marine wire, Ancor Marine Grade Duplex and Triplex Wire are without a doubt the best there is! Manufactured from individual copper strands and tinned to perform in the harshest marine environments.
  • Ancor Marine Grade Primary Wire & Battery Cable

    $5.35 ( as on 2024-11-19 13:38:22 - Details )
    Ancor Marine Grade Primary Wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra-flexible (Type 3) stranding helps prevent fatigue due to vibration and flexing. Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold (-40° F/ -40° C) and resists salt water, battery acid, oil, gasoline, and ultraviolet radiation.
  • The BEP 1002016 SPST Water-Resistant Off-On Marine Toggles Switch is a single-pole, single-throw toggle switch that turns one circuit on and off. Common applications include any single circuit requiring an On-Off style switch. PVC coated for water-resistant integrity. The nominal voltage is 12V. Rated for 25A at 12V DC. 8" 16 AWG wire lead Terminals. Mounting stem 15/32" fits panels up to 3/16" thick. Replaces Cole Hersee #5582-30.
    • St blade marine fuse block - 12 circuits with negative bus and cover
    • Positive distribution bus with #10-32 stud
    • Can be used for 24-hour circuits
    • Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses
    • Accepts ATO and ATC fast acting blade fuses
  • The DCFlat 3/4/6 Gang Illuminated Marine Toggle Rocker Switch Panel is the perfect solution for any marine electrical system upgrade and or boat rewiring. Available as a 3/4/6 Gang and rated at maximum power: 240W on a 12 0r 24-volt system. Perfect for marine application with 3.1A dual USB (2.1A+1A). Heavy-duty aluminum face panel, DC 12V Power Socket, IP rating: IP65.
  • The best way to protect your exposed wiring is with Expandable Cable Sleeving Braided Tubing. See our selection of Multiple Sizes and Colors. Material: Ultra Expandable PET Tubing (up to 150% of original size). Great for wrapping power/ground cables. Keep your cables looking like show car cables. Protects from wear and heat. Gives an attractive look with a clean install.
  • JZLiner 15 Amp Marine Momentary Toggle Switch

    $24.99 ( as on 2024-11-19 23:43:40 - Details )
    This JZLiner Marine Momentary Toggle Switch is rated at 12 Volt - 15 Amp. This 3 Pin Momentary-Off-Momentary comes with a sturdy corrosion-resistant aluminum Panel and measures Approx. 1-3/4inch Wide X 2-1/2inch Height
  • Kohree 4/6/8 Gang Marine Boat Rocker Switch Panel

    $41.99 ( as on 2024-11-19 22:43:57 - Details )
    This panel came pre-wired, saving your great effort and time to install. Just fix it to the switch hole with screws. Offers Built-in 15A fuse. Overload protection. Simple Installation. Can be mounted horizontally or vertically and Rubber sealed cap for all sockets dust-tight and debris-proof
  • Lenco Trim Tab LED Indicated Switch Kit

    $298.76 ( as on 2024-11-20 23:16:34 - Details )
    Lenco Trim Tab LED Indicated Switch Kit - Here at Lenco Marine, we have a passion that can't be taught – It's a commitment to producing quality products and providing excellent customer service that is shared by each and every member of the Lenco team.  we work hard every day and are proud to deliver exciting, dependable, products that will make your time on the water as enjoyable as it should be.
  • Lenco Trim Tab Switch Kit

    $79.79 ( as on 2024-11-20 20:06:05 - Details )
    Lenco Trim Tab Switch Kit - Lenco's Trim Tab Switch Kit, Double Rocker, MFG# LEN-10222-211D, Carling Double Rocker Switch Kit for Dual Actuator Systems, Deutsch-Connected with 36" (91.4 cm) Power Pigtail Installation hardware included. Lenco, Trim Switch Kits, Double Rocker. Economically priced double rocker switch with Deutsch connections.
  • Marine Grade Electrical Split Loom

    $9.51 ( as on 2024-11-19 20:44:05 - Details )
    Ancor's split loom has excellent heat resistance, flexibility and crush resistance, excellent for bundling wires. Ancor Marine Grade Split Loom not only permits flexible routing of cable harnesses but provides abrasion protection for wire and cable and allows lead-outs at any point for the greatest ease of installation. Temperature rated 40F to 170F. ABYC REG fire retardant.
  • Marine Grade Electrical Wire Seal

    $16.01 ( as on 2024-11-19 13:38:22 - Details )
    The Ancor Marine 765000 is a Marine Grade Electrical Wire Seal - Round Cable, 10 to 2-AWG, 1/2" NPTLiquid Tight Wire Seals provide low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round and flat cable. Resistant to salt water, gasoline, alcohol, ketones, and mineral oil.
  • Marine Toggle Switch Rubber Boots

    $6.53 ( as on 2024-11-20 20:06:04 - Details )
    This Marine Toggle Switch Rubber Boots by Invincible are rugged, tough and reliable, invincible marine offers top of the line boating products and marine accessories at affordable prices, and is well-known for their hardworking nautical line. For freshwater and saltwater boating, invincible marine designs products for avid fishermen and weekend boaters.
  • The SEAFLO 3-Way Bilge Pump Switch Panel w/Built-in 15A Circuit Breaker controls any pump equipped with an automatic float switch. Toggle has three positions (Automatic, Off, or Manual) and has a "fail-safe" spring to return the switch to "off" from the "manual" position, so the pump can not accidentally be left on. The pump has a Built-In 15A Circuit Breaker. The panel is black with an LED indicator on the switch when the switch is on.
  • Tinned Copper Marine Grade Battery Cable Assemblies

    $23.75 ( as on 2024-11-20 22:39:28 - Details )
    Ancor 18-Inch/Pack OEM Class Marine Grade Battery Cable Assemblies are manufactured with Ancor's premium UL1426 tinned copper battery cable. The battery cable is fine stranded to produce maximum conductivity and flexibility. In addition, all Ancor marine battery cables are flame retarded, UV inhibited, rated to 600V and 105°C.
  • The YONHAN Marine USB Fast Charge Power Outlet with Voltmeter is a quick charge port that works with most cell phones, tablets, digital cameras, PDAs, PSP, MP3, MP4, and other USB devices.***Note: Some mobile phones do not support fast charging, such as the iPhone series. And they adapt for normal charging speed.