Presenting the ELING marine GPS Speedometer Digital LCD Speed Gauge with Odometer Course and GPS Antenna 3 3/8″ 9-32V. Just cut an 85mm (3 3/8″) hole in the dashboard and allow a clearance of 55mm( 2 3/16”) behind the panel to fit the gauge. Connection: Black wire-GND, Red wire-power(+), Green wire-external button(+), White wire-external button(-), antenna, and you are done!
Description
ELING Digital GPS Speedometer with GPS Antenna
- Open an 85mm (3 3/8″) hole in the dashboard and allow a clearance of 55mm( 2 3/16”) behind the panel to fit the gauge
- Connection: Black wire-GND, Red wire-power(+), Green wire-external button(+), White wire-external button(-)
- Securely fasten GPS antenna, preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to pick up the satellite signals. Connect the antenna cable to the socket in the back of the gauge. Do not cut cable
- 7 Colors backlight available, 9-32V Working Voltage, Overspeed Buzzer Alarm
- Trip and Odometer Adjustable, Speed Range: 0-999(MPH, Knots, KM/H adjustable), Mileage Range: 0-999999 (Mi, NMI, KM available)
Product Features:
-Suitable for all vehicles, marine vessels, and off-road vehicles
-The signal comes directly from the satellite signal receiver(GPS Antenna), don’t need other speed sensors.
-The gauge has the advantages of high precision, quick location confirmation, and short start up time.
-IP67 waterproof and dustproof grade
-Reverse polarity protection and anti-fogging performance
-No Stationery Drift
-Stepper motors used for a full range of stepping gauges, great features with its less power consumption, longer life, higher precision, etc.
Technical Data:
-Fixing dimension: 85mm(3-3/8″)
-Indicating Range: 0~999 (MPH, Knots, Km/h adjustable)
– Switch unit between MPH(Mi), Knots(NMI) and Km/h (KM) by Backside Button
-Trip and Odometer Adjustable, Mileage Range: 0-999999 (Mi, NMI, KM available)
-Trip Counter
– Compass Indicator Function
-7 Colors backlight available
1. Power on the speedometer firstly. Press and hold on the button at the back or external button for 5~6 seconds, the backlight will change, then release the button.
2. Press and hold the button again for 5~6 seconds to switch to other backlight colors
-Working Voltage: 12V/24V
-GPS Blind Area Odometer Compensation
-Overspeed Buzzer Alarm (Value Adjustable)
-Working temperatures: – 40 to 85°C
-Operation mode: LCD display, stepper motor
Package Includes:
1x GPS speedometer
1x GPS Antenna
1x Multi-plug socket
1x Installation Instruction
